About the Bearing and Azimuth Converter Online Free Tool

The Bearing and Azimuth Converter Online Free Tool converts between whole-circle azimuths and quadrant bearings used in surveying and site layout work. It supports both azimuth-to-bearing and bearing-to-azimuth workflows.

How to Use the Bearing and Azimuth Converter Online

1. Enter the required inputs in the fields above using the units shown on the labels.
2. Select any mode, shape, or method options so the calculation matches your scenario.
3. Run the calculation and review the result summary in the output panel.
4. Check the units, assumptions, and project requirements before using the result outside preliminary review.

Choosing Options Correctly

Azimuths are normalized to a 0 to 360 degree range. Quadrant bearing angles must be between 0 and 90 degrees, with the north/south and east/west selectors defining the quadrant.

Common Use Cases

• Convert a survey bearing into a 0 to 360 degree azimuth.
• Translate an azimuth into quadrant bearing notation for field notes.
• Check direction conversions before entering values into layout software.

Quick FAQ

Does this handle degrees-minutes-seconds?
Use the formats supported by the tool fields. Convert unsupported DMS text before relying on the result.

What is the difference between bearing and azimuth?
Azimuth is measured clockwise from north from 0 to 360 degrees. Bearing uses quadrant notation from north or south toward east or west.

Is this magnetic bearing?
No. It is a format converter unless you separately apply magnetic declination or grid corrections.

Can this be used for submissions?
Use it for conversion checks, then verify against project survey standards and coordinate basis.